The BladeTape Guarantee Application Instructions

BladeTape is Easy to Apply!
Blade and BladeTape must be at, or above room temperature.

Blade surface must be CLEAN and DRY.

If necessary, trim BladeTape with scissors to proper size BEFORE removal of the adhesive backing material (Trimming is typically only required for junior blades).

Peel backing material and lightly apply BladeTape onto the blade, working from approx 1/8″ (3mm) up from the lower centre edge of the blade outward.

Adjust position as necessary. When satisfied BladeTape is positioned properly, rub firmly into place to eliminate any air bubbles.

If BladeTape becomes cut or damaged, just warm the blade slightly by hand, eliminate any moisture, and press the damaged area back down firmly onto the blade.

Questions or Comments? Please contact us – we would love to hear from you!